Hi all, problem: To an existing fully functioning SPOD I added a High output ARB compressor(sans lockers for now) using a SPOD adapter pigtail. What happens when I hit the switch is the compressor runs for about 4 seconds then stops and restarts in 3 seconds then stops and restarts over and over first I redid all electrical connections, no joy. Then I replaced the ARB relay, again no joy, next replaced the pressure switch, again no joy however I then made a jumper between the 2 female spade connections and low and behold compressor runs great however as a result no pressure switch so can't run it that way any ideas ?