Right size screw to mount factory fog light to Poison Spyder front bumper?!?!

[thechrisjones]

I'm having a problem with installing my factory fog light in my Poison Spyder bumper. The bumper has pre-drilled holes. I have 2 questions. 1st what size and type screw is needed? To fit the predrilled holes. 2nd there is a 2 or 3 inch gap from the front of the fog light and beginning of the fog light housing. Does the front of the fog light just go right up to the bumper?

 

[OscarMike2.0]

I used self tapping screws. I dont remember what size but I just went to home depot and found some appropriately sized. As for the fog light, it should be recessed in the bumper and not flush.

 

[Rideski]

I used zip ties.

 

[thechrisjones]

I used zip ties.

Good one. Will you help me install my left lift?

 

[Jackal01]

The lights are recessed. I used the same screws that were used from the factory but I also have a bunch of self tapping sheet metal screws that would have worked. I dont know the size.

 

[SaddleTramp]

self tapping sheet metal screws that would have worked. I dont know the size.

^^^This, mine are also just held in place with 4 sheet metal screws through the factory light buckets.

 

[thechrisjones]

^^^This, mine are also just held in place with 4 sheet metal screws through the factory light buckets.

This worked perfect! Thanks

 

[thardy]

Glad you got it all worked out. Looks good man.