Poison Spider inner fenders

JordanFoote86

JordanFoote86

Member
Finally got around to starting modifying my inner fenders today.
As I live in Saudi the engine likes to get a little hot. So to help tackle this I have made some custom ventilation.
Here are some pics of what I have done so far hopefully will get around to finishing them tomorrow.
IMG_1477755427.556678.jpg
IMG_1477755440.506906.jpg


Sent from my iPhone using WAYALIFE mobile app
 
A buddy of mine and I installed his on a 2012 JKU. Driver side wasn't bad but there is a bolt on the passenger side that seems nearly impossible to do...we were able to finally get it but was a nightmare. They rattled so we had to put some foam in a few spots.
 
Finally got back at these today.

I started by trimming back the inside lip of my Busheacker Fenders, so that the inner fenders could slide up behind.
IMG_1478454629.711589.jpg
IMG_1478454668.731110.jpg

Outer Fender sitting flush over the inner Fender.
IMG_1478454886.205472.jpg

Decided to go with using the nut on the rear of the Allen bolts. Lucky for me my custom vents gave me perfect access.
IMG_1478455045.304918.jpg

Fit up complete.
IMG_1478455094.601593.jpg

Removed now ready for painting tomorrow.


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom