Orion

TrailHunter

Hooked
Did you get er done?

It’s all up in there... just need to grind 2 of the “Bolt Skids” for fitment at the stock T-case skid, then tighten everything... Then I’m going to see if I can get the lower control arm skids welded in today. (Unless somewife or somekids throw a wrench in my plans... lol)




Sent from my iPhone using WAYALIFE mobile app
 

TrailHunter

Hooked
Cobra 75 installed today... went pretty smooth.

Went through the Vent:
IMG_5481.JPG

Fiber wrap to match stock:
IMG_5484.JPG

Lifted the hardtop a few inches for room to easily run wire at roll bar:
IMG_5485.JPG

Zip tied the brain... nice and solid:
IMG_5490.JPG

Planned on mounting coupler to the bottom of the dash panel.... but instead put 6” of rubber fuel line around the cable & coupler and zip tied it to the metal support... very solid & cable protected:
IMG_5489.JPG

The cable tucks quickly under the console, then hooking a couple loops takes the stress of the coupler when in use:
IMG_5487.JPG

Power wire through hole in cab and to the battery:
IMG_5491.JPG

Calibrated:
IMG_5492.JPG

Ready for use:
IMG_5494.JPG
 

JKbrick

Active Member
Cobra 75 installed today... went pretty smooth.

Went through the Vent:
View attachment 282031

Fiber wrap to match stock:
View attachment 282032

Lifted the hardtop a few inches for room to easily run wire at roll bar:
View attachment 282035

Zip tied the brain... nice and solid:
View attachment 282033

Planned on mounting coupler to the bottom of the dash panel.... but instead put 6” of rubber fuel line around the cable & coupler and zip tied it to the metal support... very solid & cable protected:
View attachment 282034

The cable tucks quickly under the console, then hooking a couple loops takes the stress of the coupler when in use:
View attachment 282037

Power wire through hole in cab and to the battery:
View attachment 282038

Calibrated:
View attachment 282039

Ready for use:
View attachment 282040

Nice job! Where did you get the cloth wrap for the wire? I like it


Sent from my iPad using WAYALIFE mobile app
 

TrailHunter

Hooked
The Build & Travels of ORION

Safety install today... got the Fire Extinguisher mounted... I only had to drill one hole in the bracket and use the factory holes in the seat frame.... The Extinguisher came with a plastic brace so I bought the metal one for better support.

IMG_5597.jpg

Feels secure & pops out easy...

IMG_5596.jpg
 
Last edited:

TrailHunter

Hooked
Quick Day/Night Trip out to Cal City with my 2 boys... The Desert is so Peaceful. The Jeep feels so at home there... Got to test out my RockHard skids & the ARB Twin... only problem was we had to come home... [emoji481]

Adios Los Angeles!
IMG_5600.jpg

My oldest tearin up his 50.
IMG_5603.jpg

Youngest gettin comfy on 4 wheels
IMG_5609.jpg

Jeep took us up to some great views.
IMG_5621.jpg

I have no idea...
IMG_5624.jpg

Desert Sunset was bad ass!
IMG_5643.jpg

Youngest prepping for Baja...
IMG_5653.jpg

Desert Sunrise... Headed Home :(
IMG_5656.jpg
 
Top Bottom