Orion

Yeah man.. I explained just that to my kids.. Its the unfortunate circle of life.. and all we can do is make the best of our time given.… Thanks. 🍻
Yea and at least she went out in a beautiful place surrounded by people she knows not a cold hospital… I know if I was to go that’s where I would want to.
 
Yea and at least she went out in a beautiful place surrounded by people she knows not a cold hospital… I know if I was to go that’s where I would want to.
Very True.. Her Son was on the boat, (there for his birthday) his wife and her grandkids. I talked to the Guy that Jumped on the boat.. he said she had a pace maker. Between the couple that leaped in the water to help, and the first responders… there is still hope for humanity.. because they were all awesome.
 
Installed EVO front Upper Arms.. Should have been a quick job but one of the tubes was a F’n Bitch to get all the way on the threads.. 40 min of on, off, clean, anti seize.. The threads never got messed up, so I don’t know what was going on.

Question: Does anyone ever change the upper arm rubber bushings on the axle?


91B2B186-B51C-4E90-9119-B9C5185DD768.jpeg21D67DA0-139A-42FE-8EA2-00ABED57C3C1.jpeg
 
Installed EVO front Upper Arms.. Should have been a quick job but one of the tubes was a F’n Bitch to get all the way on the threads.. 40 min of on, off, clean, anti seize.. The threads never got messed up, so I don’t know what was going on.

Question: Does anyone ever change the upper arm rubber bushings on the axle?


View attachment 377268View attachment 377267
I went through that with my front uppers also. I assume there was a little welding splatter in the threads, from being made.
 
Got the Switch-Pros Installed. Decided to keep the controller mounting simple.. I went right to the plastic trim and used rubber spacers to kick it out. I’m happy with how it turned out. Next project is the KC lights… then I’ll probably hook the ARB twin up to it. I really only need 4 switches as of now.


53026945-FE5B-48E2-B254-3B0C70F5A365.jpeg
B84CA599-F3F6-4ECF-BFD2-4DEC2CEB894F.jpegCBC58300-B2F2-4027-B6E0-6239070F808E.jpeg3E464500-0376-4BE6-851E-36DBBED7AF58.jpeg09777484-D56E-447D-ABA8-81C0ACB6A3ED.jpegC01492EE-D26C-4614-AA3A-0DF65F7E53B8.jpeg

Top Row Later… Bottom Row, Sooner than later.
AFFEC837-67DE-4354-8BC5-38873D49EC7A.jpeg
 
Last edited:
Installed EVO front Upper Arms.. Should have been a quick job but one of the tubes was a F’n Bitch to get all the way on the threads.. 40 min of on, off, clean, anti seize.. The threads never got messed up, so I don’t know what was going on.

Question: Does anyone ever change the upper arm rubber bushings on the axle?


View attachment 377268View attachment 377267
I replaced my axle side bushings during my death wobble troubleshooting. It’s a total bitch but probably would only be half as bad with a lift. In my case it was also all for not because I got no improvement.
 
I replaced my axle side bushings during my death wobble troubleshooting. It’s a total bitch but probably would only be half as bad with a lift. In my case it was also all for not because I got no improvement.
Yeah... it looks like they are in there pretty good... maybe I'll just hold out for the new axle. Lol
 
Top Bottom