New to the forum from Miami, Florida

djegolfpro

djegolfpro

New member
How's it going everyone? Finally created my account here. Not new to the jeep community. I've had my 2007 Rescue Green JK since 2011. I've been building it since. Running Front rubi 44 with e-locker, RCV's, Reid Racing Knuckles, fully synergy steering, rear 44 with grizzly locker, G2 chromoly shafts, and front & rear 5.13's. Genright stinger and rear tire carrier. Rock Krawler 3.5 lift with 37' Nitto Trail Grapplers and 17' Trail Ready World Series beadlocks. Next add will be a Rock Krawler 3 or 6 inch stretch, can't wait!! Big fan of Wayalife. Wanted to show you guys my JK build and hope to see y'all out on the trails some day.

ImageUploadedByWAYALIFE1437588387.210596.jpgImageUploadedByWAYALIFE1437588398.212584.jpgImageUploadedByWAYALIFE1437588415.146901.jpg
 
Last edited:
Forgot to upload this picture of the front 44 fully built. Added the RCV's and Reid Racing Knuckles two weeks ago. Enjoy y'all.

ImageUploadedByWAYALIFE1437589239.245431.jpg
 
I have aftermarket axle shafts, knuckles, 5.13's, all I need to do to the axle is truss and it's completely built front 44. Only thing that OEM on the rubi 44 is e-locker and ball joints
 
djegolfpro said:
How's it going everyone? Finally created my account here. Not new to the jeep community. I've had my 2007 Rescue Green JK since 2011. I've been building it since. Running Front rubi 44 with e-locker, RCV's, Reid Racing Knuckles, fully synergy steering, rear 44 with grizzly locker, G2 chromoly shafts, and front & rear 5.13's. Genright stinger and rear tire carrier. Rock Krawler 3.5 lift with 37' Nitto Trail Grapplers and 17' Trail Ready World Series beadlocks. Next add will be a Rock Krawler 3 or 6 inch stretch, can't wait!! Big fan of Wayalife. Wanted to show you guys my JK build and hope to see y'all out on the trails some day.

View attachment 155214View attachment 155215View attachment 155216
Click to expand...

Wave from Miami too! Is that middle pic from the Humps? If so I'm down to ride whenever you head out to any trails
 
djegolfpro said:
I have aftermarket axle shafts, knuckles, 5.13's, all I need to do to the axle is truss and it's completely built front 44. Only thing that OEM on the rubi 44 is e-locker and ball joints
Click to expand...

I ask because I know that the Rubi 44 is a 30/44 hybrid the tubes are from a Dana 30 only the housing and rind and pinion are out of a 44
 
seanb123 said:
I ask because I know that the Rubi 44 is a 30/44 hybrid the tubes are from a Dana 30 only the housing and rind and pinion are out of a 44
Click to expand...

I know that as well 😁 But I don't have 6 or 7k for a teraflex 44 complete with an Arb. I built my 44 for under 3500. Got the axle brand new with rubi shafts, elocker, Yukon 5.13's for 2200 brand new on eBay. I couldn't pass up the deal for the axle. I would love to build 60's but my JK is my dd and I don't have the budget right now to build 60's.
 
Last edited:
You must log in or register to reply here.
Top Bottom