As some of you may know, we have a Daystar lift installed on our Jeep Renegade Trailhawk and while we haven't had any issues with it, there have been a few people out there who've broken the rear control arm brackets that come with the kit. Fortunately, Daystar has been quick to address the problem and has been taking care of anyone who has one of their older brackets. Needless to say, they sent us out a set of their new brackets and today, I finally got a chance to install them.
Here's a shot of what the new brackets look like.
As you can see, the welds are wrapped all the way around the bracket now and the whole thing is powder coated black.
Here you can see the old silver bracket sitting next to the new black bracket - a BIG improvement.
Here's Renny all racked up and ready to be worked on.
Removing the old bracket.
And here's a shot of the new bracket installed.
Again, we never had any problems with our old control arm brackets but we were super happy that Daystar stepped up to the plate and sent us the updated ones and free of charge. :thumb:
Here's a shot of what the new brackets look like.
As you can see, the welds are wrapped all the way around the bracket now and the whole thing is powder coated black.
Here you can see the old silver bracket sitting next to the new black bracket - a BIG improvement.
Here's Renny all racked up and ready to be worked on.
Removing the old bracket.
And here's a shot of the new bracket installed.
Again, we never had any problems with our old control arm brackets but we were super happy that Daystar stepped up to the plate and sent us the updated ones and free of charge. :thumb:
