So I got the front 60 installed. Couple things I ran into. Had to grind down the control arm skids to fit my lower control arms. Second problem is a stud on the driver side wouldn’t take a lug and dried messing with it too rethread it. Gonna check on a kit or see if big-o can do it when they do an alignment.
Third most problem.... DEATH WOBBLE! Lol kind of bummed lol. Went through and checked everything and bolts were tight. I’m thinking my toe is set too far in. Measured the same as the rear and adjust a bit. Pretty sure trackbar ends are good. Thinking it could possibly be the synergy ends on the draglink is all I can think of..
I couldn’t find my angle finder. But used my phone and says my caster is at -10 degrees.. control arms were previously set correctly. Do the xd 60s come pre set? So I’d have to adjust my control arms?
Sent from my iPhone using
WAYALIFE mobile app