My 2015 JKU Sport Build - Polar Bear

Robertcrav

Member
started as a Sport S, options were hard top, and max tow package
11986348_10207446715196442_5307572813440940213_n.jpg

Then was able to find some take off Hard Rock Rock Rails, Painted Flares, and some 285/70 Yokohama Geolanders
12004872_10207496101711074_2537672670142404742_n.jpg

And had a friend of mine assemble some Morimoto Sealed7 HID Projectors
12139580_1493788777588350_520236001_n.jpg

Scored a great deal on CL to swap my black hard top for a painted white one
12317683_664563327015872_1804965370_n.jpg
 
Then picked up a satin black grill
13151178_566962773474953_523610546_n.jpg

Also went on an easy Jeep run with the guys from HB Jeep after my brother picked up his 2016 Black Bear
934034_10208205863294670_4381438508338659315_n.jpg
12548840_10208205863534676_5530282157273863122_n.jpg

And my son had a good time
60048_10208205864214693_6361370898590950790_n.jpg

At this point I sold my Long Travel Bronco to focus on the Jeep and started acquiring parts...
00y0y_77c4q3GwzvY_1200x900.jpg
 
Some Fox 2.0's
13613373_10209657113735024_3066960606192833989_o.jpg

Mounted some Aurora LEDs in the stock fog light location using Rigid brackets
12615691_10208298617573469_9132563551948346899_o.jpg

Found an almost new Premium Soft Top on CL
13220708_10209191862344030_2189678205569449569_o.jpg

Got the wheel rings powdercoated
13482987_10209537123455342_6285007118919440436_o.jpg

Ordered some more stuff
13620060_10209673277939119_985512016341399673_n.jpg
 
Found a good deal on some Currie Rock Jock 44s loaded with 5.13s, 35 spline axles, Detroit Front, ARB Rear, Teraflex 2.5" coils (for now), Synergy Front and Rear Bumpers, and sPod
14124255_10210024444118054_8873014761400766157_o.jpg

Then my brother and I got to work over this past long weekend
14241659_10210161857193295_8275470034449745666_o.jpg

Sloped driveways make axle swaps so much fun
14137970_10210168702564425_6183907395207718595_o.jpg

14241661_10210176650603121_1211686314594377206_o.jpg

And here she sits today...I have some Aries Aluminum flares that I'm currently painting, still need to install the ARB compressor, adjust the rear track bar as I'm getting a bit of a rub on the drivers side front of the rear wheel well...but its getting there
Polar Bear.jpg
 
Any write up on the headlights?

Honestly, it was a pain in the ass... In order to get them to fit, I had to move one of the horns, loosen and move the power steering vent, loosen and push a wiring harness out of the way...truly not a simple remove/replace install... but the light output is totally worth it
 
Found a good deal on some Currie Rock Jock 44s loaded with 5.13s, 35 spline axles, Detroit Front, ARB Rear, Teraflex 2.5" coils (for now), Synergy Front and Rear Bumpers, and sPod
View attachment 221738

Then my brother and I got to work over this past long weekend
View attachment 221739

Sloped driveways make axle swaps so much fun
View attachment 221740

View attachment 221741

And here she sits today...I have some Aries Aluminum flares that I'm currently painting, still need to install the ARB compressor, adjust the rear track bar as I'm getting a bit of a rub on the drivers side front of the rear wheel well...but its getting there
View attachment 221742

That got real fast!! :2thumbsup:
Nice looking rig! What fenders you going to go with?
 
That got real fast!! :2thumbsup:
Nice looking rig! What fenders you going to go with?

Thanks, I've owned the Jeep a year this past weekend...so have been acquiring parts, then got busy this weekend.

I'm running the Aries Aluminum Flares...just haven't finished painting them yet

20160723_185053.jpg
20160723_191250.jpg
20160723_191258.jpg
20160806_183558.jpg
20160806_183603.jpg
20160814_131147.jpg
 
Looks good!

What else did you have in mind to do ?

You did well finding that set of Curries!

Besides use it as intended...

the short list of to-do's include
  • Install Vacuum Pump Relocation Bracket
  • Install ARB compressor, and plumb rear locker
  • A-Pillar Cubes
  • Back-up/dust light cubes
  • rock lights
  • winch
  • eventually upgrade the stereo as I should have gotten the factory Alpine system
 
Besides use it as intended...

the short list of to-do's include
  • Install Vacuum Pump Relocation Bracket
  • Install ARB compressor, and plumb rear locker
  • A-Pillar Cubes
  • Back-up/dust light cubes
  • rock lights
  • winch
  • eventually upgrade the stereo as I should have gotten the factory Alpine system

Looks good Robert!!

My new HR has the Factory Alpine Option and its really a good factory sound system.
 
Looks good Robert!!

My new HR has the Factory Alpine Option and its really a good factory sound system.
Thanks Billy...my brother has it too in his BlackBear...he thinks its better than the upgraded system in his SQ5...

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Some Updates...

Dealer replaced the TIPM, and all seems to be good for now

I've also installed a Warn M8000-S, as well as getting my fenders resprayed by Maaco...I wasn't happy with my DIY spray bomb, and Maaco did good for under $400 ...

temporarily removed my Sealed7 HID Headlights for an upgrade...be back on soon

To-Do's
Install and plumb ARB Compressor
Airline to rear axle for locker
Rock-lights
Radio gear - CB/VHF
PS - Bolt-in Cage

Polar Bear with Painted Aries Flares and Winch.jpg
 
Top Bottom