Md_rubi build again

Md_rubi

New member
After 7 years of wheeling with this jk, it has gone through several changes. I am now on 3rd set of aftermarket fenders, 3rd snorkel, 2nd suspension, & 3rd set of tires and wheels. Currently it has the following:
-Currie rock jock 60. Detroit locks w/ 5:38 gears
-Tom woods 1350 drove shafts
-Currie antilock front sway bar
-Modified smittybilt xrc fenders
-Smittybilt body xrc body clad
-Smittybilt xrc slider
-Poison spyder bhf rear bumper
-Tuffy center console
-Modified Smittybilt stinger front bumper
-Warn powerplant dual force hd winch
-Redneck ram assist steering
-Psc cooler
Psc reservoir
--Polyperformance control arms
-Polyperformance upper front track bar mount
-Polyperformance front and rear track bar
-Custom upper rear track bar mount
-Rock krawler coil over springs
-Custom brakelines
-Ace engineering b-piller guard
-River raider hi-jack mount
-Custom drop down tailgate
-Goodyear mtr 40 tires
-River riader breather kit
-Polyperformance drag link
-Cool tech exhause relocation
-Custom cage
-Alpine pdx-5 amp
-Jvc kw-nt3hdt radio
-Focal speakers
-Warn 2.5 aux air tanks with air chucks and incab warn controls
-Cobra 75 wxst cb
-Kilby trail boss evap canister relocation kit
-Baja design interior led dome lights
-Rugged ridge Sideview mirror relocation bracket
-Daystar dash top
-Rugged ridge snorkel
-Aev heat reduction hood
-Prp daily driver suspension w/heated seats, stirage pouch, lumber support and camel pack
-Genright fuel cell
-Rampage hood latch
-Ridge industry dually lights
-Viking off road synthetic line with hook
-Halguard w/mount
-Prp 5 point harness

I am currently looking to repaint the jk in flat od, finish the smittybilt armor, double triangulate the rear and stretch the front1.5 -2". Next winter finally get around to the hemi swap
Sent from my SAMSUNG-SGH-I317 using WAYALIFE mobile app
 

Attachments

  • 1397112286781.jpg
    1397112286781.jpg
    65.4 KB · Views: 559
  • 1397112360700.jpg
    1397112360700.jpg
    47.7 KB · Views: 553
  • 1397112386108.jpg
    1397112386108.jpg
    60.1 KB · Views: 554
  • 1397112407438.jpg
    1397112407438.jpg
    51.8 KB · Views: 554
  • 1397112447890.jpg
    1397112447890.jpg
    55.1 KB · Views: 551
  • 1397112470000.jpg
    1397112470000.jpg
    35.8 KB · Views: 549
  • 1397112494486.jpg
    1397112494486.jpg
    42.9 KB · Views: 548
  • 1397112528722.jpg
    1397112528722.jpg
    62 KB · Views: 548
  • 1397112547143.jpg
    1397112547143.jpg
    55.8 KB · Views: 544
  • 1397112565606.jpg
    1397112565606.jpg
    32.6 KB · Views: 543
  • 1397112582815.jpg
    1397112582815.jpg
    30 KB · Views: 542
  • 1397112599530.jpg
    1397112599530.jpg
    33 KB · Views: 547
  • 1397112623915.jpg
    1397112623915.jpg
    46.4 KB · Views: 543
  • 1397112684432.jpg
    1397112684432.jpg
    84 KB · Views: 551
  • 1397112730391.jpg
    1397112730391.jpg
    63.9 KB · Views: 544
  • 1397112829508.jpg
    1397112829508.jpg
    45.9 KB · Views: 543
  • 1397112879414.jpg
    1397112879414.jpg
    73.3 KB · Views: 540
  • 1397112925028.jpg
    1397112925028.jpg
    60.3 KB · Views: 537
  • 1397113040681.jpg
    1397113040681.jpg
    80 KB · Views: 538
  • 1397113115021.jpg
    1397113115021.jpg
    65.2 KB · Views: 533
1402796788222.jpg1402796788222.jpg1402796883297.jpg
Dual piston calipers for some extra stopping power.

Sent from my SAMSUNG-SM-G900A using WAYALIFE mobile app
 

Attachments

  • 1402796810073.jpg
    1402796810073.jpg
    76.3 KB · Views: 439
  • 1402796832853.jpg
    1402796832853.jpg
    27 KB · Views: 442
  • 1402796866017.jpg
    1402796866017.jpg
    85.8 KB · Views: 438
Last edited:
Thanks guys. I will be performing the following mods:
- d - pillar armor
- a - pillar armor with light bar, limb riser, & Sideview mirrors
- roll cage speaker
- rear center console with sub enclosure, storage, & USB connections.
- tie downs
- floor plan for arb fridge in place of rear seat.

Sent from my SAMSUNG-SM-G900A using WAYALIFE mobile app
 
1622593_10203734036245463_6809681089701135570_n.jpg


I purchased the ACE B-pillar last year but I couldn't make it work with my cage. The mounting holes didn't line up to the door surround mount so I had it modified useing the tube clamps from polyperformance. i'm also thinking it will probably require further modification.
 
welded the B-pillar armor
16100_10204058732442665_1217716024514935137_n.jpg

10659246_10204058732042655_1101948153695510481_n.jpg

10511348_10204058731402639_5360041053487476956_n.jpg


fabricated center cap for the rear wheels
10632811_10204058733322687_2734947516674242705_n.jpg

10710815_10204058733442690_2659300363067021654_n.jpg

10659156_10204058731842650_9165688940028778608_n.jpg

10532940_10204058732202659_3231658332172795918_n.jpg

10606202_10204058731122632_5852844725992664301_n.jpg


i'm told the 50" light bar whistle and weather strip on the top half will solve this problem.
10606202_10204058731122632_5852844725992664301_n.jpg

10361389_10204058732842675_1413847305766781032_n.jpg


test fit the arg steering box. everything looks good and waiting for the new track bar bracket and the track bar bushing rebuild kit.
10440683_10204058733642695_3359315290829082504_n.jpg
 
ARG heavy duty Steering box, Synergy track bar bracket and selector shaft bracket installed.
10635966_10204070494336705_7761722797676692552_n.jpg

10629666_10204070494616712_3878544507745124654_n.jpg


Synergy 1st gen and 2nd gen comparison
10354163_10204070494896719_1962488766237637839_n.jpg


Light bar bracket and 50" LED light mocked for modification
10690023_10204074007664536_5666329410393281541_n.jpg

10676145_10204074007904542_5508921494321623133_n.jpg

10590700_10204074008104547_3268068917774991059_n.jpg

10592729_10204074769723587_1918548201204323977_n.jpg


new discovery, my Currie RJ60 Front inner C weld on the passenger is cracked.
10445967_10204074768123547_2222837293241892314_n.jpg


new hood latch installed. Smittybilt fender modified.
10626510_10204074768363553_17062233433739197_n.jpg

10641186_10204074768643560_5160686530157543996_n.jpg
 
hard to see from this picture but my lower front chock mount is all bent. further delay with my axles repair.

1966923_10204264273461062_3979969033070766127_n.jpg
 
Top Bottom