License plate relocation screws

[Krystianjk]

Has anyone who relocated their license plates to the middle, know how to get these things out?

 

[Speedy_RCW]

I pulled the taillight out then squeezed em together from the inside and pushed them out. Kind of a pain.

 

[Krystianjk]

I pulled the taillight out then squeezed em together from the inside and pushed them out. Kind of a pain.

Might have to try that out lol

 

[catahoula]

Yup! That^^^^^^^

 

[Speedy_RCW]

Yep they're a tight fit. They may chip the paint a little on the way out if you're not gentle. If so just make sure you use a little touch up paint or something to prevent rust.

 

[toxicwaste29]

If that's where the hole is in the fender. Mopar has a delete plate that covers that hole entirely. I have it on mine however I forget the part number.

 

[CraigRubiconLuebbers]

Cutting torch and sledgehammer

 

[Krystianjk]

If that's where the hole is in the fender. Mopar has a delete plate that covers that hole entirely. I have it on mine however I forget the part number.

Yeah I got the poison spyder cover but the ps one has lil plastic knobs that go in the place where those metal things are :/

 

[Evil]

You can get a small flat head under one using your hand as leverage and pry it out. Just make sure you don't use the Jeep as leverage and yes, they will pop out with some force and will need the holes touched up after the clips pop off.

 

[toxicwaste29]

Okay. They should pry on out or take a pair of pliers and pull them out

 

[Krystianjk]

No chips to the paint occurred when I popped em out

 

[Speedy_RCW]

No chips to the paint occurred when I popped em out

Good work!