Leveling kit and 35's!!!

I'm definitely going to trim them. It can't happen fast enough, I'm not a fan of the full fenders. They will get chopped after the gussets get welded on!

It'll look good. Someone a while back recommended this dremel bit, and that's exactly what we used to cut the wife's. Worked great, the holes keep the bit cool so it won't clump hot plastic, but it will shoot black debris everywhere, be prepared.

Dremel_Cutting_Shaping_Wheel_Cutting_and_Shaping_Wheels_543_(EN_ES)(4).jpg
 
It'll look good. Someone a while back recommended this dremel bit, and that's exactly what we used to cut the wife's. Worked great, the holes keep the bit cool so it won't clump hot plastic, but it will shoot black debris everywhere, be prepared.

View attachment 227941

Thanks for the recommendation. Y'alls cuts on her Jeep look awesome!!

View attachment 227942
Evo leveling kit, ranchos, and 35" trail grapplers. Love my kit but I'm not gonna lie...I have a bad case of lift envy.


Sent from my iPhone using WAYALIFE mobile app

No way! Keep it low and slow. :)
 
EVO Leveling Kit, kind of. I had 1" rear spacers already, so I bought only the coils. I put a 0.75" spacer on top of the EVO coils, up front.

IMG_1478302029.627930.jpg

Measured out 21" at the shock tower. Before putting these springs in, I had 2" Teraflex spacers, up front, and it measured 19.5". The Q9000 winch, that was on this Jeep when I bought it, must be really heavy.

IMG_1478302221.088563.jpg
IMG_1478302242.723342.jpg
IMG_1478302257.724334.jpg


Sent from my iPhone using WAYALIFE mobile app
 
Glad I found this thread I was going to get the Evo lvl and some 2.5-3" shocks. I have 315s now on stock rims and I max on the stock shocks too easy and my front sags too much. IMG_20170315_115945.jpgFB_IMG_1490617758513.jpeg

Sent from my Z812 using WAYALIFE mobile app
 
Top Bottom