JLUR Third Brake Light Bracket Screw Specs

J

JL-STOCK-A-HOLIC

New member
Hello. 2020 JLUR. Does anyone know specs for the T25 screws that fit into the 7 holes in the third brake light bracket? 5 shorter screws, 2 longer screws. Also, how bout the 4 that fit into the spare tire mount arms below that bracket?

Finding it on Mopar site is proving difficult. So, any suggestions on where to find these little guys is appreciated. Greater Sacramento area or anywhere online.

Recently switched back to the original setup from a third brake light relocation. Lost all the screws. Thank you!
 
JL-STOCK-A-HOLIC said:
Hello. 2020 JLUR. Does anyone know specs for the T25 screws that fit into the 7 holes in the third brake light bracket? 5 shorter screws, 2 longer screws. Also, how bout the 4 that fit into the spare tire mount arms below that bracket?

Finding it on Mopar site is proving difficult. So, any suggestions on where to find these little guys is appreciated. Greater Sacramento area or anywhere online.

Recently switched back to the original setup from a third brake light relocation. Lost all the screws. Thank you!
Click to expand...
Is it in this diagram?

Screenshot_20230305_084813_DuckDuckGo.jpg

Spare Wheel, Tailgate Mounted - 2020 Jeep Wrangler

MoparPartsGiant.com offers genuine Spare Wheel, Tailgate Mounted for 2020 Jeep Wrangler with great price and fast delivery.
www.moparpartsgiant.com www.moparpartsgiant.com

Screenshot_20230305_085149_DuckDuckGo.jpg
 
JL-STOCK-A-HOLIC said:
Hello. 2020 JLUR. Does anyone know specs for the T25 screws that fit into the 7 holes in the third brake light bracket? 5 shorter screws, 2 longer screws. Also, how bout the 4 that fit into the spare tire mount arms below that bracket?

Finding it on Mopar site is proving difficult. So, any suggestions on where to find these little guys is appreciated. Greater Sacramento area or anywhere online.

Recently switched back to the original setup from a third brake light relocation. Lost all the screws. Thank you!
Click to expand...
the bolts that hold the mount to the body are M8x1.25x30 (13mm socket) fully threaded 8.8 or stronger

for the T25 screws, those are the same as trim screws. you could take one out of each side of the lower half posts where it slides onto and use those on the 2 bottoms of that face cover; for the short ones, stick a thin zip tie or paper clip to measure the depth then get some course thread stainless screws from the hardware store or order from amazon. If you have a variety of zip ties, you can also get an estimate of the width needed
 
jeeeep said:
the bolts that hold the mount to the body are M8x1.25x30 (13mm socket) fully threaded 8.8 or stronger

for the T25 screws, those are the same as trim screws. you could take one out of each side of the lower half posts where it slides onto and use those on the 2 bottoms of that face cover; for the short ones, stick a thin zip tie or paper clip to measure the depth then get some course thread stainless screws from the hardware store or order from amazon. If you have a variety of zip ties, you can also get an estimate of the width needed
Click to expand...
Hell yeah, redneck engineering,

To the OP, just an FYI, MOPAR rapes you on any hardware. OCD be damned when they want $2-$4 per screw plus shipping.
 
jeeeep said:
the bolts that hold the mount to the body are M8x1.25x30 (13mm socket) fully threaded 8.8 or stronger

for the T25 screws, those are the same as trim screws. you could take one out of each side of the lower half posts where it slides onto and use those on the 2 bottoms of that face cover; for the short ones, stick a thin zip tie or paper clip to measure the depth then get some course thread stainless screws from the hardware store or order from amazon. If you have a variety of zip ties, you can also get an estimate of the width needed
Click to expand...
Tremendously helpful. And in short order. to boot. That info is just the thing. Many thanks for specs and workarounds. Brilliant!
 
You must log in or register to reply here.
Top Bottom