JL Year Part Compatability

E

epriev

Active Member
Are vendors slow to upgrade listings for parts, or is there a difference between the 2025 model year and previous years.

Sure, the dash and interior are refreshed, but I don't image the frame and suspension changed. Finding parts, I have to enter an older year to find parts.

Even 4wheelparts/ORW in Denver has to find bumpers and suspension components using older model years.
 
Sort by date Sort by votes
epriev said:
Are vendors slow to upgrade listings for parts, or is there a difference between the 2025 model year and previous years.

Sure, the dash and interior are refreshed, but I don't image the frame and suspension changed. Finding parts, I have to enter an older year to find parts.

Even 4wheelparts/ORW in Denver has to find bumpers and suspension components using older model years.
Click to expand...
Most are the same BUT there are a few parts that are 24+ specific, mainly parts that mount to the frame from what I’ve seen due to small changes in that area from the factory.
 
Upvote 0
there were interior changes in the 2024 model year with both the dash area, the sport bar between a and b pillars and trim in the driver side rear cargo area. i know that when i was looking at mods at the end of 23 and beginning of 24, many manufacturers had not test fit with a 24 and often it was simply that they were not willing to blindly state that it fit.
 
Last edited:
Upvote 0
elektra_the_4xe said:
there were interior changes in the 2024 model year with both the dash area, the sport bar between a and b pillars and trim in the driver side rear cargo area. i know that when i was looking at mods at the end of 23 and beginning of 24, many manufacturers had not test fit with a 24 and often it was simply that they were not willing to blindly state that it fit.
Click to expand...
Yup plenty of interior changes. One I ran into recently was an under the seat mount for an arb twin. The floor and seat mounts are different so the bracket wasn’t compatible. Bracket was 18-23+ (per mfg) but jeep was a 24 and wouldn’t work without major modification.
 
Upvote 0
You must log in or register to reply here.
Top Bottom