Jk6 hellcat

[WJCO]

Any ideas ?? Or just the new one?

I've melted zip ties with a lighter and dripped it like a mig welder. If works really well if part isn't under pressure. It's like plastic welding.

 

[Andy5160]

I’ll try. The new one is $159

 

[jeeeep]

I’ll try. The new one is $159

doing what WJCO says about plastic welding/melting, with the 2 sides together, also bend a thin wire or paperclip, heat it up and press it into the plastic to stitch it together

 

[Andy5160]

doing what WJCO says about plastic welding/melting, with the 2 sides together, also bend a thin wire or paperclip, heat it up and press it into the plastic to stitch it together

View attachment 436268

Thanks. Was thinking about paperclip trick.

 

[Andy5160]

Had paperclip through and around. Plastic weld over it. It holds so far. Will make a hole through the brackets and zip tie or similar through just in case.

 

[cozdude]

Had paperclip through and around. Plastic weld over it. It holds so far. Will make a hole through the brackets and zip tie or similar through just in case.