Jk bump stops. Custom?

[JEEPAlexander14]

So I'm going to hidden falls this weekend and since I did a drag link flip and almost all new suspension I did some flex test. I found out I need some longer bump stops or maybe something like a hockey puck on the spring perch. I have this much more room to go before my drag link and track bar hit the frame.
However my bump stops are still probably 2 inches from touching.
My question is has anyone made a custom bump stop extension type thing or a puck that sit on the bottom?
Sorry if I worded it where it made it confusing.
Thanks

 

[JEEPAlexander14]

I figured out how I'm gonna do it. So ignore this post.
How do I delete a thread I started?

 

[quertyman]

Go out and just get 2 or 3 inch bumpstop extensions. Also people have used actual hockey pucks with a hole drilled in them I think. And I don't think you can delete a thread.

 

[JEEPAlexander14]

Go out and just get 2 or 3 inch bumpstop extensions. Also people have used actual hockey pucks with a hole drilled in them I think. And I don't think you can delete a thread.

Okay thanks. I'm probably going to use hockey pucks cause it's cheap.

 

[quertyman]

Okay thanks. I'm probably going to use hockey pucks cause it's cheap.

Just make sure they actually fit in the springs first. Do you have bs extensions already or is it stock? And with a dl flip the standard is 3" more than stock.

 

[JEEPAlexander14]

I think I already have some. Bought my jeep with a rough country lift so I think I have extended ones from that but not completely sure. The pucks are 2 bucks a piece so it's not a big deal if they don't work.

 

[Grubbicon]

Pucks will work. I got one of them in either side under neath my synergy bump stops in my jeep in the front.

 

[JEEPAlexander14]

Is it bad to run different size bump stops front and rear?

 

[quertyman]

Is it bad to run different size bump stops front and rear?

Nothing wrong with it.