Hydro Assist Setups

[Rottenbelly]

Please, please, please provide any and all feedback. I've been looking at WTO and PSC. I understand PSC has a great kit, but really trying to determine if it is worth the extra coin. A lot of extra coin!!!

I run The WTO kits on both my jeeps. One is about 5 years old with zero problems. Just put the setup on my new jeep.

 

[Casey_250]

Please, please, please provide any and all feedback. I've been looking at WTO and PSC. I understand PSC has a great kit, but really trying to determine if it is worth the extra coin. A lot of extra coin!!!

I wouldn't even consider PSC at the price it is at for my 37s after running WTO for 6 months now.

Sent from my SM-G950W using WAYALIFE mobile app

 

[Mybadjk]

Has anyone had their box tapped for wto and ran a psc ram?


Sent from my iPhone using WAYALIFE mobile app

 

[13_gecko_rubi]

Has anyone had their box tapped for wto and ran a psc ram?


Sent from my iPhone using WAYALIFE mobile app

I know several folks who have done this. Last I knew PSC and WTO bought their rams from same person.

Sent from my SM-G930V using WAYALIFE mobile app

 

[kawimoto]

I wouldn't even consider PSC at the price it is at for my 37s after running WTO for 6 months now.

Sent from my SM-G950W using WAYALIFE mobile app

Reassuring enough for me


Sent from my iPhone using WAYALIFE mobile app

 

[dalearyous]

Please, please, please provide any and all feedback. I've been looking at WTO and PSC. I understand PSC has a great kit, but really trying to determine if it is worth the extra coin. A lot of extra coin!!!

will do!

about to go this same route! what'd it run you if you don't mind me asking? I know shipping will vary but still going to be close.

so i don't know the final price yet. its long story so i'll keep it short:
i went to measure my stroke length and realized my steering stops were way too tall which explains my crappy turning radius. i basically need to drop my drag link and see how much farther my steering box will go, trim my steering stops just right, and then re-measure stroke length. in a perfect world the ram would stop just short or on the steering stops and the turning radius would be maxed out.

 

[dillard09]

M_Savage just sent a stock box in to WTO for rebuild and port and tap. I believe it was $260. He is going to be running it with a PSC ram.

Sent from my SAMSUNG-SM-G935A using WAYALIFE mobile app

 

[dalearyous]

will do!

so i don't know the final price yet. its long story so i'll keep it short:
i went to measure my stroke length and realized my steering stops were way too tall which explains my crappy turning radius. i basically need to drop my drag link and see how much farther my steering box will go, trim my steering stops just right, and then re-measure stroke length. in a perfect world the ram would stop just short or on the steering stops and the turning radius would be maxed out.

i dropped the drag link and realized there was a lot more turning available. so i chopped off most of the steering stops and now my tires hit my frame with like 8.5" stroke. this doesn't surprise me running 40s and i already knew i should scoot the front axle forward a bit. anyway, i called WTO and told them to ship an 8" ram. my stops are threaded so after its on, centered and everything is nice and aligned and the toe is set ill build out the steering stops slightly.