Hello from Chattanooga, TN

H

Hsdinger911

New member
My names Hunter, I have had my 2010 4 door wrangler since I was 16, it was my first of many but is always my favorite. It started out as 2.5 inch lift, then 35s to 37s. Now it still has 37s (until they get warm out), but have upgraded to SD 60 front and 14 bolt rear. Before the one tons and long arms I pulled the body off and swapped a 2008 Chevy 6.0 LS and 6L90e trans. Love it, it’s like a brand new jeep again, still trying to figured out a few little things with the suspension, running 3 link front and taraflex long arms rear, Genright rear sway bar. Feel free to ask about anything, I have done all the work from re-gearing to the motor swap myself, I know I still have questions and constantly learning.
 

Attachments

  • IMG_4938.jpeg
    IMG_4938.jpeg
    266.7 KB · Views: 9
  • IMG_7793.jpeg
    IMG_7793.jpeg
    269 KB · Views: 9
  • IMG_7463.jpeg
    IMG_7463.jpeg
    288.1 KB · Views: 9
  • IMG_6095.jpeg
    IMG_6095.jpeg
    341.1 KB · Views: 10
  • IMG_4354.jpeg
    IMG_4354.jpeg
    171 KB · Views: 9
  • IMG_4269.jpeg
    IMG_4269.jpeg
    318.9 KB · Views: 9
Looking for a gauge to watch my trans temp, I’m trying to figure out which one is on Eddie’s evolution jeep is running. Any others recommendations that look good in stock jeep interior that will clamp to cage? @wayoflife
 
Hsdinger911 said:
Looking for a gauge to watch my trans temp, I’m trying to figure out which one is on Eddie’s evolution jeep is running. Any others recommendations that look good in stock jeep interior that will clamp to cage? @wayoflife
Click to expand...
I run an Aeroforce gauge that I have clamped to my cage. It plugs into the OBDII and you can set it to give you whatever info you're wanting.
 
You must log in or register to reply here.
Top Bottom