Front end/steering squealing

B

bumpy_baldwin

Member
JLU w/ 3.5” lift and has synergy mfg tie rod, drag link, steering stabilizer bracket (for fox ATS 2.0), and sector shaft brace (that helped me the most with death wobble).

Anyway, I have a constant squealing when turning left or right. I took off the sector shaft adapter, cleaned it up, applied new grease throughout, yet the squealing is still there. All ball joints are good besides 1 tie rod that will need to be replaced. Everything else is greased up. Started maybe 2 months ago and just now finding time to mess with it. All aftermarket front end parts were installed between 1.5yrs to 4 years ago.

Any ideas on where to look? Even made sure the steering fluid was topped off.
 
A "constant squealing" would not be a joint issue. Being that it's happening while turning, have you checked your steering fluid level? Might be a bearing going bad on a pulley, maybe have someone turn the steering wheel for you while you give things a closer listen.
 
You must log in or register to reply here.
Top Bottom