On their long arm lift? No. On "a" long arm lift? That's pretty ambiguous.
Long time no see! I've missed you.
On their long arm lift? No. On "a" long arm lift? That's pretty ambiguous.
Just in case anyone is interested, VKS offers as AN option on their sliders to ship the rear mount loose so if you are running LA kit you can weld it yourself.
Looks like a nice bar.
Just in case anyone is interested, VKS offers as AN option on their sliders to ship the rear mount loose so if you are running LA kit you can weld it yourself.
Looks like a nice bar.
So does EVO. VKS ripped off EVO.
Having the rock rails welded on before the long arm kit is installed makes it a little harder to drill the holes through the frame on the rear bracket, you will have to drop the exhaust down to drill from the inside of the frame
So that would explain driver side mount but does that mean you have to drop the fuel tank for the passenger side if you already have the sliders welded on?
Well technically your supposed to drop the tank anyway for trimming the tank skid but the passenger bracket is different you only drill through one side of the frame it can be done but your literally playing with fire trimming that skid with it in place
Makes sense. I thought I had read somewhere that dropping the tank wasn't required. Either way its not a big deal. I would much rather do that then struggle with drilling with the sliders in place.
Yes you can loosen the tank skid and separate it from the tank a little enough to get a cut off wheel in there but one small slip of the cut wheel will make for a very bad day :yup: but on the pass side you can drill with a little angle since your only drilling through one side of the frame