Evo tire carrier w/ rotopax

[Crystaliner]

Just another way to install the rotopax system, if your license plate is in this location





Used AXIA alloys mounts 1.75 mounts. Came w/hardware also.








Found these clamps at the local offload show but you can find them online as well





Had to drill 2-1/4 holes in the plate 13'' apart.

When I used the predrilled holes the plate was off centered.



Clears the license plate light by 1/2 inch



What makes this nice...Im still able to reach behind the tire to remove the plate w/o the container on of course.

All in all it was easy...

 

[MF3R]

Pic?


Sent from my iPhone using WAYALIFE mobile app

 

[Ddays]

Rearview camera mount optional?
LOL, not as if you can see much with these carriers anyways.


View attachment 257314


I do have to say I like the way that mount won't let the can or cans move down the bars on the carrier. I have two individual ones I picked up that will allow that if you don't make sure they're good and tight.

 

[Crystaliner]

Rearview camera mount optional?
LOL, not as if you can see much with these carriers anyways.


View attachment 257314

I know...Cant see shit with that NITTO Trail Grappler hanging on the ass end of my Jeep

 

[benatc1]

Love this idea, was trying to find a way to mount that plate My carrier, and this is perfect, thanks for sharing!


Sent from my iPhone using WAYALIFE mobile app

 

[Crystaliner]

Love this idea, was trying to find a way to mount that plate My carrier, and this is perfect, thanks for sharing!


Sent from my iPhone using WAYALIFE mobile app

The clamp Allows the tire to snug up against the carrier like there was nothing there.
The clamp looks to be tumbled deburred before anodize and has smooth edges all around




Sent from my iPhone using WAYALIFE mobile app

 

[WhoDoesThat]

Great idea. I've been wanting to do this with my carrier down the road

 

[Evil]

I ended up getting the joker machine pack mounts.

 

[Evil]

you can mount them however you like, sideways tilted and shit.

 

[Crystaliner]

I ended up getting the joker machine pack mounts.
View attachment 257746
View attachment 257748

Good to know....I have Joker machine parts for my Harley


Sent from my iPhone using WAYALIFE mobile app

 

[Crystaliner]

Someone will have a easier time now that a couple options have been listed. [emoji106]


Sent from my iPhone using WAYALIFE mobile app

 

[notnalc68]

Just another way to install the rotopax system, if your license plate is in this location



View attachment 257309

Used AXIA alloys mounts 1.75 mounts. Came w/hardware also.


View attachment 257310
View attachment 257311
View attachment 257312



Found these clamps at the local offload show but you can find them online as well

View attachment 257313



Had to drill 2-1/4 holes in the plate 13'' apart.

When I used the predrilled holes the plate was off centered.

View attachment 257314

Clears the license plate light by 1/2 inch

View attachment 257315

What makes this nice...Im still able to reach behind the tire to remove the plate w/o the container on of course.

All in all it was easy...

That looks like a good idea, especially if you are going to stack two cans.


Sent from my iPhone using WAYALIFE mobile app