Evo Swaybar Link sizes

-AINOKEA-

Hooked
Hey all. It’s time to swap out some swaybar links but not sure what length.

Evo website says 9.5”

IMG_1018.jpeg

but the install instructions say to get the 10.5” for Enforcer 2.5”.

IMG_1019.jpeg

Also, any tips on shipping? I’m used to paying shipping here to Hawaii but this seems a bit excessive for something that’ll presumably fit in a flat rate box.

IMG_1020.jpeg
 
There really is no exact length per se. Really depends on the travel of the suspension. Ideally you will want them a tad too long than too short. Best way to get a good length is to droop out your axle and measure. You should be able to go off of EVO’s though. Rears are usually longer as shown.
 
There really is no exact length per se. Really depends on the travel of the suspension. Ideally you will want them a tad too long than too short. Best way to get a good length is to droop out your axle and measure. You should be able to go off of EVO’s though. Rears are usually longer as shown.
Ok thanks. Both of those numbers are from EVO so wasn’t sure. I’ll just go measure what I have now and try to get something close without either maxing or bottoming out the link ends.
 
Top Bottom