Evo Mfg Gen 2 Rock Sliders??

[mo0s3]

Hell, if they are bolt on why do they have the brackets with holes in them?

The holes are for rosette weld I believe , could be wrong [emoji16]

 

[Rb1boxer_3]

The holes are for rosette weld I believe , could be wrong [emoji16]

I meant the hole on the frame buy already did.

 

[zimm]

Mine stick out a little further in the rear. That's why I was freaked about a few pages back thinking I welded on the wrong sides!

Here's where mine went:

 

[Rb1boxer_3]

Mine stick out a little further in the rear. That's why I was freaked about a few pages back thinking I welded on the wrong sides!

Here's where mine went:

Perfect thanks. That's what I needed to see was that first hole in the very front

 

[Rb1boxer_3]

Well I did it and finished 5 hrs later . It's a real B**** doing it by yourself. I haven't welded in about 3.5 years so maybe it wasn't a good idea for thus to be my first welding mod but oh well the first one came out like I have enough popcorn for everyone. The rest came out just right. now on to the next project.

 

[Rancho]

Bumping an old thread

I am looking for an image of how the rear mounts to the frame.
Basically I am curious of this works with new LA mounts.

Thanks in advance. :beer::beer:
Matt

 

[wayoflife]

Bumping an old thread

I am looking for an image of how the rear mounts to the frame.
Basically I am curious of this works with new LA mounts.

Thanks in advance. :beer::beer:
Matt

I have the Gen 1 sliders but here's a shot of how they mount up on the frame with our high clearance long arm brackets. Hope this helps.




Sent from my iPhone using WAYALIFE mobile app

 

[Rancho]

Boom!!! Thanks That should do it.
Thanks Eddie.
Matt