EVO front lower arms question?

[bkac]

What's the best way to grease the EVO front lower control arms? does anyone an adapter that works or. Do you have to unbolt the arms to grease them?

Sent from my VS980 4G using WAYALIFE mobile app

 

[OverlanderJK]

Best thing to do is replace the zerk fitting that comes with the arms with a 90* zerk fitting. That way you won't have to take them out every time. You can find the 90* at the auto parts store.

 

[bkac]

Best thing to do is replace the zerk fitting that comes with the arms with a 90* zerk fitting. That way you won't have to take them out every time. You can find the 90* at the auto parts store.

Just the answer i was looking for! Thanks Overlander JK

Sent from my VS980 4G using WAYALIFE mobile app

 

[JKU-Tom]

I had a hole cut in the top of the bracket so I could access the zerk. How often does everybody grease their joints.

 

[bkac]

I had a hole cut in the top of the bracket so I could access the zerk. How often does everybody grease their joints.

I would like to know that too?

Sent from my VS980 4G using WAYALIFE mobile app

 

[Christarp]

I had a hole cut in the top of the bracket so I could access the zerk. How often does everybody grease their joints.

I try and do it every oil change. I may skip one or two every now and again though.

 

[MTG]

Have overlander do it for you...he has lots of practice removing his control arms.