Evo drag link flip kit

[erik932]

Does anyone have a helpful DIY video on installing a evo enforcer 3 inch and drag link flip kit? Going to tackle this install this weekend but still a bit nervous about doing it myself. Any help is appreciated!


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

No video here, but this thread may help: https://wayalife.com/showthread.php/2028-EVO-drag-link-flip

 

[desertrunner]

I installed my old rock krawler 3.5" lift using the write up Eddie has for I think the terraflex 4" lift. Most of the steps were all the same just a different brand so that may help too

Sent from my SAMSUNG-SM-G890A using WAYALIFE mobile app

 

[erik932]

No video here, but this thread may help: https://wayalife.com/showthread.php/2028-EVO-drag-link-flip

Thank you !


Sent from my iPhone using WAYALIFE mobile app

 

[erik932]

I installed my old rock krawler 3.5" lift using the write up Eddie has for I think the terraflex 4" lift. Most of the steps were all the same just a different brand so that may help too

Sent from my SAMSUNG-SM-G890A using WAYALIFE mobile app

[emoji1362]


Sent from my iPhone using WAYALIFE mobile app

 

[zimm]

Evo flip needs some serious wrench work with all those bolts. There's a slot to get the wrench up from the bottom to hold nuts. Sucks.

I eventually threw that shit away and went with a weld in synergy bracket which works with the PSC steering cylinder.