End links for Rubi swaybar

[LasVegasJK]

I'm going to install a Rubi swaybar on my non rubicon. It's a 2015 JKU Willys with an EVO leveling kit, stock Rubi wheels/tires, JKS Disconnnects, and stock shocks.
My JKS are 1-1/2" longer than stock links, and I will pry run these until I upgrade to an Enforcer.
Since I'm still running stock shocks, is there any concern with flipping the sway bar when the shocks are completely extended?

 

[cozdude]

As long as your sway bar is at about 10* above parallel at ride height you should be good

 

[LasVegasJK]

As long as your sway bar is at about 10* above parallel at ride height you should be good

Hmmm, yeah, I'll pry go ahead and get some longer links. ill have to get one of those angle-finder-degree-scale units.

 

[OverlanderJK]

Hmmm, yeah, I'll pry go ahead and get some longer links. View attachment 185013ill have to get one of those angle-finder-degree-scale units.

You can use a tape measure too.

 

[LasVegasJK]

You can use a tape measure too.

Yeah, I could eyeball it a little higher than level and measure.