ChiliDawg
New member
So I'm scratching my head over something that may be way simpler than I realize - the plugs that are provided to connect the two wires coming from the diff with the harness leading up the chassis seem to have these purple "covers" on them. I can remove one of them easily with needle nose pliers but the other plug is too small to get a needle nose in, so I'm not sure if these are actually supposed to come off? Seems like they have to otherwise there's no connection... am I just gonna have to get a tiny pair of needle nose?
Other question is - the wires coming out of the diff aren't marked - they're just two black wires. Does it matter which leads in to what wire or is it fine as long as you don't get them crossed up down stream?
Sent from my iPhone using WAYALIFE mobile app
Other question is - the wires coming out of the diff aren't marked - they're just two black wires. Does it matter which leads in to what wire or is it fine as long as you don't get them crossed up down stream?
Sent from my iPhone using WAYALIFE mobile app
