Dynomax evolution competition exhaust

MTG said:
How do you like it?

The airaid looks nice, but I don't think it will work with the PCS system. :grayno:
Click to expand...

Love them both. Sounds pretty BA if you ask me. :wings: The Airaid will not work with the PSC system. :naw: I plan on doing 37's, will have to figure something out. But at least I CARB complaint while I am still in this state. :brows:
 
StrizzyChris said:
Perfect, thanks for the peace of mind!
Click to expand...

Any questions let me know. You will have to cut a little off the evap skid. I had to remove a skid to get the stock stuff out. Put it all in there and tighten it down. Your rear rubber mount will sit vertical vice horizontal. It sounds so BA.
 
Skid_Kid said:
Any questions let me know. You will have to cut a little off the evap skid. I had to remove a skid to get the stock stuff out. Put it all in there and tighten it down. Your rear rubber mount will sit vertical vice horizontal. It sounds so BA.
Click to expand...

Really? You had to cut the evap skid? Ahhh, never mind...I moved mine over to avoid contact with the stock DS. :thumb:
 
Skid_Kid said:
Did you relocate it? What kit did you use?
Click to expand...

Not really, just moved it over 2". No kit, just drill a couple of new holes is all. I'm happy to walk you through it. But probably in another thread or PM so we don't sidetrack this thread any more. 15 minutes is all it takes.
 
I also relocated my evap skid. Just followed the TeraFlex YT video, but I still had to cut the intermediate pipe to allow clearance for the rubber muffler hanger. Instead of cutting the skid to mount the hanger bracket, I just pounded the skid flat using a brass punch...

fefca1bcfcf70d82d46a1ea0c844ed3f_zpse33c94f0.jpg


c6390878a45678bf602978cc82bd8a8e_zps00ceda01.jpg


bf96f5ca79155bf944a547819999657d_zps20b394c2.jpg


:cool:
 
Just finished the install and test drive and need some help.

On the test drive just as I am getting onto the freeway, the check engine light comes on and now has a DTC of p06dd.
Also during the test drive I found if I jump on the gas, the acceleration cuts out at around 3k RPM and goes limp then recovers.

As I research p06dd it seems to be related to an oil pump, but happen right after I installed this exhaust. Coincidence?

Anyone have any ideas what I should be looking at?

Thanks
 
Has anyone installed thing with the Poison Spyder evap skid? I am just stuck on how to support the drop down.
 
You must log in or register to reply here.
Top Bottom