rcdude3
New member
Dynetrac ProSteers *pictures*
I have a set of Dynatrac ProSteer ball joints from my D30. The BJs have 6,175 miles on them. I also have the factory knuckles. These knuckles will work with the D30 or the D44 axle. Nothing wrong with the knuckles. I also have the flipped drag link taper that I will throw in with the knuckles. The taper IS NOT installed, so the knuckle is still factory condition.
There is a mark on one of the lower BJ's which is shown in the picture, but this will not affect the install or performance of the BJ. Instructions and cotter pins will be included.
Looking to get $340 + shipping for the ProSteers and $200 + shipping for the knuckles w/ drag link flip taper.
PM with any questions.
I have a set of Dynatrac ProSteer ball joints from my D30. The BJs have 6,175 miles on them. I also have the factory knuckles. These knuckles will work with the D30 or the D44 axle. Nothing wrong with the knuckles. I also have the flipped drag link taper that I will throw in with the knuckles. The taper IS NOT installed, so the knuckle is still factory condition.
There is a mark on one of the lower BJ's which is shown in the picture, but this will not affect the install or performance of the BJ. Instructions and cotter pins will be included.
Looking to get $340 + shipping for the ProSteers and $200 + shipping for the knuckles w/ drag link flip taper.
PM with any questions.
Last edited:
