Dynatrac Prosteer lowers

[RockinAZJK]

Just received my new set of Dynatrac ball joints and it would appear that the lowers are no longer rebuildable? Is this correct or did I by chance get the wrong ones?


Sent from my iPhone using WAYALIFE mobile app

 

[RockinAZJK]

This is what the lower looks like


Sent from my iPhone using WAYALIFE mobile app

 

[OverlanderJK]

Umm two screws on the top to open it up. :thinking:


Sent from my iPhone using WAYALIFE mobile app

 

[wayoflife]

Umm two screws on the top to open it up. :thinking:

This ^^^^

The ball joints were re-designed a long time ago to provide maximum clearance for the drive shaft yokes.

 

[RockinAZJK]

Umm two screws on the top to open it up. :thinking:


Sent from my iPhone using WAYALIFE mobile app

There are two screws on the top but I wasn’t sure where it opens. The line in the cup that you see is just a step, not a cap.


Sent from my iPhone using WAYALIFE mobile app

 

[black pearl]

There are two screws on the top but I wasn’t sure where it opens. The line in the cup that you see is just a step, not a cap.


Sent from my iPhone using WAYALIFE mobile app

I believe when you undo the two screws, it drops out the bottom. I could be wrong as I haven't had to rebuild mine yet.


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

From their site, it looks like the stud comes out through the bottom. Pictures here are the old design though.

https://www.dynatrac.com/rebuildabl...alljoints-for-2007-2015-jeep-wrangler-jk.html

 

[jeeeep]

I say open it up :thumb: