Sithwindu
Member
Guess I will check out other options tomorrow,,,
I do remember northridge saying they were working with tenfactory on getting chromolys for the pr44's in the next month or so
Guess I will check out other options tomorrow,,,
Here is what I did with our lovely RCV shafts... They are much better suited here :cheesy:
![]()
If you want to get a ballpark of your rear driveshaft length, mine is 43.5" from reel tcase adapter to center of u joint at rear 1350 yoke. This is on a 13 JKUR Auto with the PR60 SF rear and about 3.5-4" of lift. I would highly recommend installing the axle and measuring it then having yours shortened by a local ds shop. When I ordered my Dynatrac Axles I called Reel and they said they knew the right length for the PR60 rear on a JK because they deal with them so much. So they shipped me the driveshaft so I didn't have to wait since my rig is my DD. Well it was a couple inches too long. I will give them kudos on customer service, when i called with the measurements they had a new one on way same day and included return label to ship back the incorrect one "at my earliest convenience."