Drag Link won't unthread

Colorado4x4

Active Member
I would order that tie rod puller. I have one in my tool bag and it works great. Guarantee it would pop it out. Or just cut the son of a bitch and stop jacking around with it. My buddy brought over his Jeep last week to put a new track bar on because his wimpy friends couldn’t break the axle side track bar bolt. I ended up shearing the bolt and the bolt was rusted to the inner metal sleeve in the bushing. Son of a bitch nut was seized onto the bolt and the bolt was seized in the sleeve in the bushing. Sledged the chit out of it for a while and then just got the grinder out. I agree with these other guys, you got to make progress and get after it!
 

Attachments

  • F440303C-1A08-4E6E-89AA-DF938F87D8DF.jpeg
    F440303C-1A08-4E6E-89AA-DF938F87D8DF.jpeg
    439.3 KB · Views: 8
  • 6DFC7A9F-D29E-4290-97D4-BE0B7DDD0FB5.jpeg
    6DFC7A9F-D29E-4290-97D4-BE0B7DDD0FB5.jpeg
    322.4 KB · Views: 8
  • BA8337EA-803C-4D6B-A601-C17C52D123BD.jpeg
    BA8337EA-803C-4D6B-A601-C17C52D123BD.jpeg
    382.7 KB · Views: 8
  • 6160336D-5ADD-4160-A1B7-66FB499F95C4.jpeg
    6160336D-5ADD-4160-A1B7-66FB499F95C4.jpeg
    218.4 KB · Views: 8
Top Bottom