aaronstephen
New member
How the heck do you get these damn doors off?!?!
- aaron
Sent from the WAYALIFE app
- aaron
Sent from the WAYALIFE app
Well, assuming you took the T50 bolt out first, it is located on the underside of the hinge, unplug the wire harness on the inside and then un hook the nylon latch from the hook en on the inside. From here I roll down the windows then lift STRAIGHT UP. You may need a little WD 40 in the hinges. Good luck, hope this helps :thumb::beer:How the heck do you get these damn doors off?!?!
- aaron
Sent from the WAYALIFE app
Awww, come on guys, it's so simple maybe you need a refresher course. Heyya! It's all ball bearings nowadays. Now you prepare those stuck doors with some 3-in-1 oil and some gauze pads, and you're gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.
Awww, come on guys, it's so simple maybe you need a refresher course. Heyya! It's all ball bearings nowadays. Now you prepare those stuck doors with some 3-in-1 oil and some gauze pads, and you're gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State.
After you get them off, put some white lithium grease on the hinges