Control Arms

cozdude

cozdude

Guy with a Red 2-Door
ok so i have a 2 door sport with a Teraflex 2.5" coil lift and i am still running factory control arms. i was thinking of replacing the factory ones with aftermarket ones. so here comes the questions

1. What are the arms i should replace at a minimum?
2. whats a decent (on the cheaper side) control arm to get?


im looking to keep it on the cheaper side of things cause im trying to save for a condo but know i need a new F/R driveshaft and control arms at some point
 
cozdude said:
ok so i have a 2 door sport with a Teraflex 2.5" coil lift and i am still running factory control arms. i was thinking of replacing the factory ones with aftermarket ones. so here comes the questions

1. What are the arms i should replace at a minimum?
2. whats a decent (on the cheaper side) control arm to get?


im looking to keep it on the cheaper side of things cause im trying to save for a condo but know i need a new F/R driveshaft and control arms at some point
Click to expand...

at least front lowers to correct your caster.... I have JKS and they work great not sure on the cost compaired to others
 
JK1 said:
at least front lowers to correct your caster.... I have JKS and they work great not sure on the cost compaired to others
Click to expand...

ok thank you!

are rear uppers needed as well? i thought i heard/read something about them as well. helps with the pinion angle maybe?
 
cozdude said:
ok so i have a 2 door sport with a Teraflex 2.5" coil lift and i am still running factory control arms. i was thinking of replacing the factory ones with aftermarket ones. so here comes the questions

1. What are the arms i should replace at a minimum?
2. whats a decent (on the cheaper side) control arm to get?


im looking to keep it on the cheaper side of things cause im trying to save for a condo but know i need a new F/R driveshaft and control arms at some point
Click to expand...

At that lift height you shouldnt need to worry about the drive shafts.
 
cozdude said:
ok thank you!

are rear uppers needed as well? i thought i heard/read something about them as well. helps with the pinion angle maybe?
Click to expand...


Rear uppers if you replace your rear DS with a non-factory one. If you are trying to do things cheap, just find a used take-off factory DS. :yup:
 
MTG said:
Rear uppers if you replace your rear DS with a non-factory one. If you are trying to do things cheap, just find a used take-off factory DS. :yup:
Click to expand...

Would a used 4 door one fit/work for the rear since its longer?


Sent from my iPhone
 
You must log in or register to reply here.
Top Bottom