camber adjustment

Mr. Rubi1

Mr. Rubi1

New member
Take a look, the tires are in negative camber? I just lifted and put new tires on two weeks ago. 2.5 lift and 33's what would cause this? Bad ball joints? Help
 
Not sure what I'm looking at, but bent c's, bent housing could also cause camber to be off.
 
Check your ball joint for play. If it's good, then bent c or housing. You can go to an alignment shop and get a print out. They can't do nothing to correct it. But the print out would let you know how bent it is.
 
Looks like the fender to me. The concrete is all cracked and maybe giving an illusion. Take the same picture in a different location and see if your still seeing the same.
 
The gender is courtesy of my son taking down some dual in the garage. Can't seem to align it so it stops pulling to the right?
 
Mr. Rubi1 said:
Damn spell check, the fender is courtesy of my son taking down some drywall in the garage
Click to expand...

Best is if it hasn't been aligned do it.
I've personally installed quite a few lifts the past few years on other fellow Jeepers, as well as being a former mechanic. Just PM me if you have any specific questions I'd be glad to help
 
You must log in or register to reply here.
Top Bottom