Are these dimensions correct??

[NUBS MCGEE]

After looking at all the options for front bumpers for the jk, none seemed to strike my liking. With that said, I decided to make my own. I already have acces to my buddys metal shop, welders, and an old version of autocad.

Someone sent me this graphic to use for some measurements. I just wanted to see if they are correct before i drill out the mounting holes.


Any correct info is welcome.

 

[jeeeep]

taking off the front bumper to measure is pretty easy

 

[NUBS MCGEE]

taking off the front bumper to measure is pretty easy

soon as stock is off, that ugly thing isn't going back on. just want to cut everything once, weld it, and hang it.

 

[OverlanderJK]

Take off the air damn/skid plate under the bumper and you should be able to measure it.

 

[Canvas JK]

Mount plates look correct not sure of the distance between them. May I recomment the mount holes to a drill bit larger than required to allow for slightest irregularity which might be there.

 

[Holeshot]

I already took those measurements when I built my bumper.. You're lucky I still have it on my cell phone. :thumb: