68' M715 AKA "Smokey", 8.1 engine on links, coils and 40's

Rock40

Rock40

Active Member
Steering coolers and mounts...

63527832605__F8E44086-ACE8-4C25-A860-3326A2495AB3.jpg

Trophy Trucks run ONE of these coolers so naturally the 715 needed two. Probably gross overkill

63528225744__9D07A648-E998-4CFF-8C80-27774EAC69F2.jpg

Tucked up safely above the crossmember but they’ll still get plenty of airflow

63528230065__B473DBFD-BC14-42A7-B659-FA149C833626.jpg




Sent from my iPhone using WAYALIFE mobile app
 
Rock40

Rock40

Active Member
FFPulley77 said:
Wonder whatever happened to this rig... I really wanted to see it finished.
Click to expand...
Well, it’s not finished and the project isn’t washed up……yet.

I had a child several months ago who passed away due to complications from his birth. That pushed the reset button on a lot of stuff. I’m slowly getting back into it now after being off work for several months.

I’m also juggling the summer wheeling season in my FJ40, along with work full time and construction of a 40x60 shop.

For now, the 715 has been safely tucked away and it’s patient. It knows more good stuff is coming.
 
Bierpower

Bierpower

Hooked
Sorry to hear that. I lost a 15 month old nephew a couple years ago. No part of that is easy. Hope you get some time to get the FJ out on the trails and clear your head.
 
WJCO

WJCO

Meme King
Rock40 said:
I had a child several months ago who passed away due to complications from his birth. That pushed the reset button on a lot of stuff. I’m slowly getting back into it now after being off work for several months.
Click to expand...
So sorry to hear this.
 
Elroy231

Elroy231

Active Member
Sorry to hear of your loss. Yup climb in that fj and keep your head right. No thats not an easy thing to happen.
 
FFPulley77

FFPulley77

Hooked
Rock40 said:
Well, it’s not finished and the project isn’t washed up……yet.

I had a child several months ago who passed away due to complications from his birth. That pushed the reset button on a lot of stuff. I’m slowly getting back into it now after being off work for several months.

I’m also juggling the summer wheeling season in my FJ40, along with work full time and construction of a 40x60 shop.

For now, the 715 has been safely tucked away and it’s patient. It knows more good stuff is coming.
Click to expand...
I’m sorry for your loss. This project doesn’t compare to that. I wish you the best of luck in pulling through.
 
JKbrick

JKbrick

Active Member
Wish there were some magical phrase to make things better but I wish you the best. There is another angel in heaven now to watch over you
 
Rock40

Rock40

Active Member
Ok, it’s about time to get back after this….

Started cutting up the driver side fender to clear the coils and the tubing

241BF732-84D9-4023-A0B4-EEE8EE1B944E.jpeg

53E31A02-99CC-4709-93E3-9F50B34979CF.jpeg

C22C5AEE-DCF1-4B9E-85E8-C3E7F1ADD2A6.jpeg

Found this inscription in the upper portion of the fender. Looks like it was hand carved while the brass wasn’t watching, ha!

BD69AA2C-4786-43E6-940B-2EDD48C3055A.jpeg
 
Rock40

Rock40

Active Member
Need to find a place for this 3 quart Accumulator and the engine bay is rapidly running short on room!

2C3F623C-C6E4-404D-9352-F8846AFF7CAE.jpeg

The only place is next to the radiator standing upright. However the inner fender is in the way….so cut this chunk out

F285B0C5-C513-4B02-922F-52141686915B.jpeg

Looking downward prior to making the cut. This is where the Accusump will go

50DEDA6F-A826-4738-9C20-EDBB81E45095.jpeg
 
You must log in or register to reply here.
Top Bottom