35's on factory wheels.

Manvan said:
Have run 35" x 12.5's on stock 17" rims with 1-1/2" spidertrax spacers for 47k miles and 5 years
Click to expand...

Same experience for me, but not as many miles. No issues at all!

CJW said:
I think the tire "folding" would be caused more by going with a super tall tire (with weak sidewalls) on a small rim
Click to expand...

THIS!!!

I've never ran a thin side walled tire so I have no experience with the sidewall flexing and affecting the handling. Run my Nittos with 28psi and they held firm around corners. :idontknow:
 
MI jeepskate said:
At Discount tire we strongly advise not going over the reccomended width of the wheel, a 315 will work but i myself didnt go that route because of the horror stories ive encountered and heard about. you run a good risk of folding that tire over and popping it off the bead. same goes for having a wide wheel and narrow tire. i had a friend come to me and try to have us mount 12.5 inch wide tires on 7 inch wide wheels, i said no and told him the risks and he proceded to do the work himself. he flipped his truck 4 times on the highway on and off ramp..... insurance paid for the truck and he was back 2 days after to get bigger wheels. go with a bigger wheel in my PROFESSIONAL opinion
Click to expand...

OJK12 said:
Got my Spidertrax wheel spacers on this weekend and love them!!! View attachment 132344
Click to expand...

Your jeep looks badass
 
Thanks guys! I just rattle caned them with OD green paint from Walmart. I wanted to see if I liked the color before committing to Powdercoating or something better.
 
If you have a Sahara with 18" rims, you might consider getting aftermarket rims. The price of a tire jumps about $80 - $100 for a 18" tire as opposed to a 17" tire.
 
Yup, I run the stock wheels on 35x12.5 and have been for a while now. No problems...there Is some rubbing at a full turn!
 
Love my setup for now.
315/70/17s nittos load range d
4.10 gears. Works pretty good offroad. 1.5 spacers
Ran them all week between 7-9 psi in Moab on some nasty trails and never blew a bead. Close but it didn't happen.
 

Attachments

  • 1427149254605.jpg
    1427149254605.jpg
    105.6 KB · Views: 110
JK_b/c_yolo said:
Love my setup for now.
315/70/17s nittos load range d
4.10 gears. Works pretty good offroad. 1.5 spacers
Ran them all week between 7-9 psi in Moab on some nasty trails and never blew a bead. Close but it didn't happen.
Click to expand...

Looks good! At first I didn't like the new Rubi wheels, but I have to say, I think they look great now that I have seen some bigger meats on them! :thumb:
 
AllAmericanInfidel said:
Looks good! At first I didn't like the new Rubi wheels, but I have to say, I think they look great now that I have seen some bigger meats on them! :thumb:
Click to expand...

I'm with you on that. They are growing on me until beadlocks and 40's are ready to be bolted on. You should see them with rock rash all over them. :)
The valve steams are blocked nicely from the rocks also.
 
Guys thank so much reading this help. I like the current jeep rims but thought I had get new rims for bigger tirez. Instead I'll be looking into keeping the rims and saving money towards the tires.
 
Last edited:
You must log in or register to reply here.
Top Bottom