3" Plush rides?

Can someone give me the uncompressed length and inside diameter measurements of the 3" fronts?
 
onesickjk said:
Were 2 of them shorter? the reason i ask is because ive only done springs on a mustang and they were very close to the same heighth these are very noticeably shorter.

i can take pics just give me a sec.
Click to expand...


im pretty sure the fronts are the taller ones, due to the weight they will compress a little and even everything out once on.
 
cozdude said:
im pretty sure the fronts are the taller ones, due to the weight they will compress a little and even everything out once on.
Click to expand...

Thats what i assumed but you know where that gets ya sometimes. Just thought i would ask before i installed and had an old school gasser drag car look.
 
The assumed front come in at 20 3/4 in uncompressed length and 4 inch inside diameter at the bottom and 2 3/4 at the top

The assumed rears are 17 1/2 in uncompressed length and 4 inch at the bottom and 2 at the top does this sound right for the 3 inch lift or no?
 
onesickjk said:
Thats what i assumed but you know where that gets ya sometimes. Just thought i would ask before i installed and had an old school gasser drag car look.
Click to expand...

here is a pic of how my teraflex springs looked before i installed them. fronts on the left and rears on the right. i assume the plush rides are the same.
 

Attachments

  • ImageUploadedByWAYALIFE1377007291.795557.jpg
    ImageUploadedByWAYALIFE1377007291.795557.jpg
    103.2 KB · Views: 115
cozdude said:
here is a pic of how my teraflex springs looked before i installed them. fronts on the left and rears on the right. i assume the plush rides are the same.
Click to expand...

The plush rides i received look nothing like that! The assumed front and rears are the same diameter but the top coils on them are posted above! i would have assumed that they resembled yours but i guess i was wrong or they sent the wrong ones. Things like this happen and sometimes are given lol. They do a lot of business.
 
onesickjk said:
The assumed front come in at 20 3/4 in uncompressed length and 4 inch inside diameter at the bottom and 2 3/4 at the top

The assumed rears are 17 1/2 in uncompressed length and 4 inch at the bottom and 2 at the top does this sound right for the 3 inch lift or no?
Click to expand...

Thanks for measuring those up! Sounds about right, stocks are 17.5" front and 14.5" rear.
 
Last edited:
Capita said:
Thanks for measuring those up!
Click to expand...

No problem. i cant wait to throw them in this weekend. I really hope the ride is as good as everyone says. i have Rubi springs and a 2.5 bb which netted me around 3 1/4 inch lift and rides a little better than stock but i think its because of the shocks i have just hoping this is better!
 
You must log in or register to reply here.
Top Bottom