Bloody Stitches
New member
Searched the forum. Leaned about the blend door actuators. Replaced the passenger one (which didn't need replacing) checked the driver side one. Finally bit the diagnostics bullet and sent it to the dealer. Cost me $120 for them to say, "it may be the heater core. Gonna cost you $1400 to fixe".
I pulled my Jeep out the dealer. Yesterday I ram some clear tubing to he black hoses running to and from the firewall. Using some 5/8 sized brass barbs, clear tubing, and a garden hose I was able to run water through the heater core. Hoping to collect some nasty residue or some sort of evidence of clogging. NOTHING!
The metal tubs behind dash board running to and from the core are pretty hot. After the flush I put everything back together. Still blowing cold. Anything I'm missing here?
Sent from my iPhone using WAYALIFE mobile app
I pulled my Jeep out the dealer. Yesterday I ram some clear tubing to he black hoses running to and from the firewall. Using some 5/8 sized brass barbs, clear tubing, and a garden hose I was able to run water through the heater core. Hoping to collect some nasty residue or some sort of evidence of clogging. NOTHING!
The metal tubs behind dash board running to and from the core are pretty hot. After the flush I put everything back together. Still blowing cold. Anything I'm missing here?
Sent from my iPhone using WAYALIFE mobile app