Rubizon
New member
Hey everyone, so I got my clutch replaced a little while ago and ever since then I've been hearing a noise from the shifter. It seems like i just hear the transmission and clutch and everything working and there is no silence. I had someone tell me to make sure the inner boot was properly placed, because without a seal thats what could be the cause of all the noise making its way through. The noise was bearable and didn't bother me, but now that I got my gears changed and the revs are higher than before it is quite annoying.
So anyway, I removed the outer shift boot and the inner shift boot was basically just slid on top of the shifter and wasn't secured down in any way, shape or form. What my ultimate question is…is that how the inner shift boot is supposed to be, or should it be secured down and be creating a better seal? if so, how do i properly secure it down?
Thanks!
So anyway, I removed the outer shift boot and the inner shift boot was basically just slid on top of the shifter and wasn't secured down in any way, shape or form. What my ultimate question is…is that how the inner shift boot is supposed to be, or should it be secured down and be creating a better seal? if so, how do i properly secure it down?
Thanks!