2" lift with spacers

Deathmask

New member
I just stored a great deal on set of Mopar 2" lift coils with Rubicon shocks, shock extenders, and sway bar end links, the guy also threw in a pair of Teraflex 1" front coil spacers. I already have a Teraflex 0-3" adjustable tracbar. I've done some searching to find that some people say it's ok to use the spacers with coils, and some say it's a bad idea to use the spacers with 2" springs. Most of the people are advising against using spacers with Teraflex 2.5" coils, maybe since those coils usually net a taller lift, they're worried to run into a problem being taller than 4" on stock driveline components?

My question is, would it be ok for me to use the 1" spacer with my Mopar 2" springs since they net 2-2.5".
 
2" lift with spacers

Mopar coils are teraflex coils. You will net a lot more than 2.5".

What is your experience with the Old Man Emu 2" coils? Every lift I've seen, lifts a 2 door an extra inch, and you have a 2 door, so tell me something. I have the 2" EVO front coils, but even after a Warn M8000 & Rock Hard mounting plate, I'm still getting 3" inn front. They ride great, but I only want like 2" total
 
Last edited:
What is your experience with the Old Man Emu 2" coils? Every lift I've seen, lifts a 2 door an extra inch, and you have a 2 door, so tell me something. I have the 2" EVO front coils, but even after a Warn M8000 & Rock Hard mounting plate, I'm still getting 3" inn front. I only want like 2" total

I've never run them. Normally coils give an inch more on a two door. Run a spacer light if you only want 2". Spacers will net exactly what they say.
 
I've never run them. Normally coils give an inch more on a two door. Run a spacer light if you only want 2". Spacers will net exactly what they say.

Cool. I'm running spacers now, because I don't want to pay for what over 3" costs yet
 
Top Bottom