2.0 Liter Coolant Flush/Fill

jeffk487

New member
This is my first Turbo Jeep and I want to do a coolant flush and fill. I have read that I need to change the coolant in the Turbo System and the Engine itself. I cannot determine if these two systems are independendent or not. I am assuming they are one system, draining and refilling main system would replace the approximate 9.5 quarts for engine and 3.5 quarts for turbo system. YouTube channels usually answer these questions but none have mentioned it. Can someone let me know if they are the same or independent system? Also anyone have a good link to YouTube video on this? Thanks!
 
150k or 10 years I don’t believe them
I hope you don't take this the wrong way but you're coming onto an internet forum NOOB section to ask how to do something and yet, you seem to have a better idea what should be done with your Jeep than what Jeep states? May I ask why you don't believe Jeep and based on what?
 
Upvote 0
I hope you don't take this the wrong way but you're coming onto an internet forum NOOB section to ask how to do something and yet, you seem to have a better idea what should be done with your Jeep than what Jeep states? May I ask why you don't believe Jeep and based on what?
Master science mechanical engineering University of Freiburg and being German we are just skeptical
 
Upvote 0
Actually funny but seems it’s “catching” in USA. Attached are the four files needed for the separate turbo coolant I discovered
 

Attachments

  • b18ffef3-262e-4b3f-8ee0-d19fb7dc3c56_4444.pdf
    223.7 KB · Views: 2
  • 2904c316-4cb3-40a7-9a63-91c6911c48a2_11111.pdf
    339.1 KB · Views: 0
  • 2e15b916-91f9-4678-8a2f-b4e02009502d_2222.pdf
    415.9 KB · Views: 1
  • 1ef2f548-2822-4532-b510-cc30c9d8061d_3333.pdf
    351.3 KB · Views: 0
Upvote 0
Top Bottom