circlepete's latest activity
-
Also, I see that you live in the rust belt. I would highly recommend removing the joints from the control arms, apply antiseize on the... -
Agreed. 6 ton stands or better will typically be tall enough. Same goes for a floor jack, one that will go at least 20" or more is what...
-
Okay, that helps and I would say that the hardest part of the lift install will be getting the control arm torqued to spec. The values...
-
How tall of a lift and all the components you're planning on installing will make a bit of a difference in terms of difficulty. Knowing...
-
Jack up the jeep as high as possible and use tall jack stands on the frame. The more you can lower the axle, the easier it is to get...
-
A little more info about what lift would help us help you. Are you doing full double throwdown long arm or a spacer lift? Lots in...
-
circlepete reacted to bobfriesenhahn's post in the thread Random (non-Jeep) Shit You’re Working On.... with
Like.
Working on completing workbench for Arizona mountain home. Constructed using 4x4s, 2x6s, bonded 2x4s, and two sheets of 3/4" high... -
-
Mapo tofu
-
Best years for Games… graphics were good enough that is was fun… but bad enough that we wanted to do other shit… outside.
-
circlepete reacted to black pearl's post in the thread Random (non-Jeep) Shit You’re Working On.... with Like.
Over the last couple months we’ve been working on getting animals back on our ranch. Chicken coops are now done, turkey coop is done...
-
circlepete replied to the thread Wave from Northern California.Welcome 👋
-
Hello, all! I made the mistake of taking my family to Moab and renting a jeep with some buddies who have built Jeep crawlers...Now I own...
-
circlepete replied to the thread What’s up fellow Jeep owners. Arizona based, USAF C2 retired here..Welcome 👋
-
circlepete reacted to OverlanderJK's post in the thread What’s up fellow Jeep owners. Arizona based, USAF C2 retired here. with Like.
Factory exhaust or does it dump under the body? Good exhaust tape should allow almost zero heat to escape to that area. Hell, I’ve been...