FuriousDz
New member
Hey all,
Looking to go with 1 of these, does anyone have any experience with either or know of any advantage 1 has over the other? They are both around the same price.
Painless - P/N 57000
Switch-pros - SP-8100
- Both can run 8 accessories
- Painless is (8) 30 amp fuses and (8) 30 amp relays
- Switch-pros is 8 Outputs, 7 rated @ 18A, 1 rated @ 30A
I dont know much about electrical but looking at this it looks like the painless has a little bit of an advantage as far as all 8 being rated at 30A vs 7@18A and 1@30A on the switch-pro?
There may be others down the line but as of now what I plan on running off of these will be;
50" light bar which draws around 20A
2-4 A pillar lights but they only draw about 1 A each
front and rear air lockers eventually
rock lights
winch?
Thanks!
Looking to go with 1 of these, does anyone have any experience with either or know of any advantage 1 has over the other? They are both around the same price.
Painless - P/N 57000
Switch-pros - SP-8100
- Both can run 8 accessories
- Painless is (8) 30 amp fuses and (8) 30 amp relays
- Switch-pros is 8 Outputs, 7 rated @ 18A, 1 rated @ 30A
I dont know much about electrical but looking at this it looks like the painless has a little bit of an advantage as far as all 8 being rated at 30A vs 7@18A and 1@30A on the switch-pro?
There may be others down the line but as of now what I plan on running off of these will be;
50" light bar which draws around 20A
2-4 A pillar lights but they only draw about 1 A each
front and rear air lockers eventually
rock lights
winch?
Thanks!