jkwebbie
New member
You damn right they are!!!! Took me like 3 hours to get the damn axle shafts out
Sent from my SAMSUNG-SGH-I747 using WAYALIFE mobile app
CJ buggy build
- Thread starter klungly
- Start date
Sent from my SAMSUNG-SGH-I747 using WAYALIFE mobile app
klungly
Caught the Bug
Thanks, I worked on the driver side for a few hours before I tried the press, after that it went a whole lot easier.
RockinAZJK
Caught the Bug
klungly
Caught the Bug
klungly
Caught the Bug
Took the seals of the axle shafts with a gear puller.
I got a new yoke, but it wasn't long enough, I cut off what was needed from the old flange and welded it onto the new yoke.
Sent from my XT1585 using WAYALIFE mobile app
I got a new yoke, but it wasn't long enough, I cut off what was needed from the old flange and welded it onto the new yoke.Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
Both kingpin kits came today, now I'm waiting on the lower bearing caps. I didn't think about them until I was figuring out how to put everything together. This is the first time working with kingpins so it's a learning process.
Sent from my XT1585 using WAYALIFE mobile app
Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
I got some new diff covers from ruffstuff today. They're almost impenetrable.
my lower kingpin came today.
Sent from my XT1585 using WAYALIFE mobile app
my lower kingpin came today.Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
My locker showed up for the front axle.
Enough heim joints for front and rear 4 link came today.
getting all my parts ready for when we move into a house with a garage next month.
Sent from my XT1585 using WAYALIFE mobile app
Enough heim joints for front and rear 4 link came today. getting all my parts ready for when we move into a house with a garage next month.Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
I've been working out of a shed so a garage is going to make working a lot easier.
Sent from my XT1585 using WAYALIFE mobile app
Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
I took advantage of black Friday and ordered all the parts I need to build my suspension. The first box showed up a few days ago with all my mounting brackets. I have the Dom for my links, a tubing bender and hydraulic ram coming tomorrow. The adapter to make the bender air/hydraulic came as well.
Sent from my XT1585 using WAYALIFE mobile app
Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
klungly
Caught the Bug
Got my tubing bender in today, I'm still waiting on the die to come in, should be here next week. 
I can't wait to start making my own roll cage.
Sent from my XT1585 using WAYALIFE mobile app
I can't wait to start making my own roll cage.Sent from my XT1585 using WAYALIFE mobile app
daddyusmaximus
New member
This looks like it's going to be incredible.
klungly
Caught the Bug
klungly
Caught the Bug
I think it'll be worth it. I'd like to see those rock sliders when they're done.
Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
The first half of my control arm tubing came in today. 4' x 2" 250 wall tubing. Maybe a little too long. One of them is mocked up with the full length tube to be about 4.5' from hole center to center.Sent from my XT1585 using WAYALIFE mobile app
klungly
Caught the Bug
My tubing bender is all but done. Next is fabricating a stand for it
. I finally have a place to work on the CJ it self. As long as work at my job stays slow I'll be able to get tons of progress made. 
.
Sent from my XT1585 using WAYALIFE mobile app
. I finally have a place to work on the CJ it self. As long as work at my job stays slow I'll be able to get tons of progress made. .Sent from my XT1585 using WAYALIFE mobile app
T_rav
New member
I've started building them but time is precious so it's a slow road. I found a friend that has a bender so hopefully next week I'll get my two bends done and I'll be able to get moving again. I plan on doing a write up once I'm finished with pics so I'll keep you posted.