Gears

JKVADER

JKVADER

New member
So my question of the day is how hard is it to install gears for a 35/37 inch tire?:thinking:
 
Depends on how mechanically inclined you are...but more along the lines if you're not afraid of taking apart the differential. I know a lot of guys are afraid of doing such work. I'm going to be regearing mine from 4.10 to 4.88 this spring. Though I've taken apart my axle and diff before. You have to ensure every bolt is torqued properly but oter than that it's just a big puzzle
 
Mitrig said:
Depends on how mechanically inclined you are...but more along the lines if you're not afraid of taking apart the differential. I know a lot of guys are afraid of doing such work. I'm going to be regearing mine from 4.10 to 4.88 this spring. Though I've taken apart my axle and diff before. You have to ensure every bolt is torqued properly but oter than that it's just a big puzzle
Click to expand...

Do you need a lot of specialty tools to do it?
 
There are videos on YouTube that show you how to do it and to really do it right you do need some tools specific to the job.
 
Honestly it's fairly straight forward. Before I had to take mine apart from my last trip I watched a few videos and I believe there was a write up not sure if it was on here or not I'll try to find it for you
 
You must log in or register to reply here.
Top Bottom