Axle swap and bolt on coilovers

[2013rubirick]

So today I finally got around to getting the stock rubi 44 out and ready to install the prorock 60. I'll keep posting pics of the install. I'm doing front and rear coilovers at the same time.

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[OverlanderJK]

Those jack stands look really safe. :crazyeyes:

 

[2013rubirick]

Those jack stands look really safe. :crazyeyes:

Lol I knew someone was gonna say something about that. Those are redneck jack stands. There oak which is very strong. I'm not worried about them breaking

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[Oscar35]

Man, I hope one day I can upgrade as well. I hope you don't have a termites.

 

[OverlanderJK]

Lol I knew someone was gonna say something about that. Those are redneck jack stands. There oak which is very strong. I'm not worried about them breaking

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

$10,000 in jeep parts.....



can't afford jack stands.

 

[HLKSMSH]

Those jack stands look really safe. :crazyeyes:

I am one that has done the same thing when half way into the job and figured out the stands were not high enough.

 

[2013rubirick]

$10,000 in jeep parts.....



can't afford jack stands.

Gotta save money somewhere! Lol.


I have a couple sets but those work

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[Vettethret]

$10,000 in jeep parts.....



can't afford jack stands.

:cheesy::cheesy::cheesy::cheesy: They are oak though!

 

[StrizzyChris]

Did the same thing when installing my coilovers...but mine were for backup in case the jacks fail

 

[Vettethret]

So today I finally got around to getting the stock rubi 44 out and ready to install the prorock 60. I'll keep posting pics of the install. I'm doing front and rear coilovers at the same time.

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

Man I wish I knew how to work on my own rigs!:beer:

 

[2013rubirick]

Man I wish I knew how to work on my own rigs!:beer:

Only way to learn is to get out and do it. Luckily my brother in law was a mechanic for 20 years and he helps me with everything

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[DA RUNT]

Man I wish I knew how to work on my own rigs!:beer:

Just unbolt everything til it comes apart :bleh:

 

[ridg3runner]

I am one that has done the same thing when half way into the job and figured out the stands were not high enough.

Problem solved. $200 for the pair from Summit and they double as Barstools. And that's a 40" tire behind it :cheesy:

 

[OverlanderJK]

Problem solved. $200 for the pair from Summit and they double as Barstools. View attachment 91816

I have no desire to sit on that.

 

[2013rubirick]

Problem solved. $200 for the pair from Summit and they double as Barstools. View attachment 91816

That really doesn't look like a good barstool to me

Sent from my SAMSUNG-SGH-I537 using WAYALIFE mobile app

 

[HLKSMSH]

Those look bad ass but I am with the other guys I dont think I could use them as a bar stool lol.

 

[ridg3runner]

I have no desire to sit on that.

I recommend taking the center post out first, lmao

 

[DA RUNT]

I recommend taking the center post out first, lmao

wow, just wow :shock:

 

[Strike Force Zebra]

Bar stools!

 

[Panda]

Did the same thing when installing my coilovers...but mine were for backup in case the jacks fail

View attachment 91814

I miss the ole red neck jack stands I'm gonna have to salvage another 6x12 from work :grayno: