Mike Pierson
Hooked
Recently I replaced the factory control arms with a full set from Synergy and replaced the front driveshaft with a 1350 made by a local shop using Neapco components.
Now that I have adjustable control arms and a digital angle finder, I’m going to try to fix a spring issue where the front springs have bowed despite using the appropriate coil isolaters and recommended front control arm lengths.
![IMG_4399.jpeg IMG_4399.jpeg](https://www.wayalife.com/data/attachments/346/346755-f2d87562c5bb584a1d5c7f712ceb4458.jpg)
![IMG_4609.jpeg IMG_4609.jpeg](https://www.wayalife.com/data/attachments/346/346751-71eaf390990f7c2a166bde3e43f4d064.jpg)
![IMG_4610.jpeg IMG_4610.jpeg](https://www.wayalife.com/data/attachments/346/346752-e08e2fde8527098d085765d3761f7307.jpg)
![IMG_4608.jpeg IMG_4608.jpeg](https://www.wayalife.com/data/attachments/346/346753-14451250f7bf0fc24b3d6b6f39ea00b2.jpg)
Now that I have adjustable control arms and a digital angle finder, I’m going to try to fix a spring issue where the front springs have bowed despite using the appropriate coil isolaters and recommended front control arm lengths.
![IMG_4398.jpeg IMG_4398.jpeg](https://www.wayalife.com/data/attachments/346/346754-696ba633b332393245b68daf2b91cdfc.jpg)
![IMG_4399.jpeg IMG_4399.jpeg](https://www.wayalife.com/data/attachments/346/346755-f2d87562c5bb584a1d5c7f712ceb4458.jpg)