Stroker byild

J

jeepking93

New member
Hey I just built a stroker for my 93 yj with manual trans and now I'm not getting any spark, it is intermittent, I got it to fire a few times but it seems random and I've never seen anything like that before , I've use both new and old distributors and ignition systems but hardly a difference, I've spent about 3 hours messi g with timing and and all that but cant get it to start up, I'm lost

Sent from my SM-J337U using WAYALIFE mobile app
 
jeepking93 said:
Hey I just built a stroker for my 93 yj with manual trans and now I'm not getting any spark, it is intermittent, I got it to fire a few times but it seems random and I've never seen anything like that before , I've use both new and old distributors and ignition systems but hardly a difference, I've spent about 3 hours messi g with timing and and all that but cant get it to start up, I'm lost

Sent from my SM-J337U using WAYALIFE mobile app
Click to expand...

Where are you checking the spark at?
 
Did you change the cam or distributor? Have you confirmed they are meshing properly and the distributor spinning.

Have you confirmed power to the ignition system during cranking?

I assume it’s injected. Do you have power to the injectors and are they functioning properly? Sometimes they jam up after a couple of weeks with use or fuel pressure and can cause the same symptoms


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom